PG-280P is a mass-produced automated IC programming equipment with high cost performance. PG-280P supports tape-in/out, tube-in/out, IC marking and other functions. The number of programming modules can be 4 or 8. It not only improves the production efficiency, but also eliminates the possible human error in the process of IC programming.
PG-280P is a mass-produced automated IC programming equipment with high cost performance. PG-280P supports tape-in/out, tube-in/out, IC marking and other functions. The number of programming modules can be 4 or 8. It not only improves the production efficiency, but also eliminates the possible human error in the process of IC programming. The performance of both mechanical system and programming system has reached the very high level.
Features
◆ Equipped with high precision CAM mechanism and 4 nozzle, the actual UPH output is 2800.
◆ Motor pressing block system: the speed of pressing block can be adjusted and the action is flexible and fast. The pressing height can be adjusted without overvoltage to improve the life of the SOCKET.
◆ High precision mechanical positioning system (positioning accuracy: ±0.05mm).
◆ PG280P can interact with the customer’s MES system, and the production process can be controlled in real time. It can also be matched with the lightweight CPS system developed by our company.
◆ PG280P can be used with programmers BeeHive204AP *2 or SP16-FX *16 or PD-200-S8 *2 or CTP-S20 *16.
◆ Supported adapter: up to 16.
◆ I/O Devices: Tape, Tube
◆ Supported package: PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, SOP, TSOP, TSSOP, SON, BGA, EBGA, VFBGA.
◆ Supported IC size: >2*3mm
Technical Parameters
|
PG280P Specifications of four-nozzle IC programming machine |
||
|
Program components
|
Supported programmer |
Special programmer, self-made machine |
|
Adapter |
Up to 16PCS |
|
|
Capacity |
Nozzle |
PPU four-nozzle system |
|
UPH |
2800PCS/H |
|
|
Control system |
Transmission |
High precision grinding ball screw; ball spline; linear slide rail; cam mechanism |
|
Drive system |
Servo drive system |
|
|
X/Y/Z precision |
X:±0.05mm;Y:±0.02mm;Z:±0.05mm; P:±0.05mm U(θ):±0.15 degree |
|
|
Positioning |
Machinery |
High precision mechanical double positioning sockets |
|
I/O device |
Feeder |
Power-driven feeder (8-24MM); YAMAH Air-feeder(8-24MM) |
|
Tube (TB16V） |
Tape-in, Tube-in |
|
|
Tape (TP15） |
Tape width (8~32mm); Velum: heat-seal, film adhesive |
|
|
Marking |
Ink marking |
Cylinder ink marking device (ATMK20): dot, number |
|
Laser marking (optional) |
Brand laser marking machine |
|
|
AOI recheck (optional) |
AOI recheck (detection content can be uploaded to MES system) |
|
|
Labeling (optional) |
Label Feeder |
|
|
Control system |
Operating system |
Windows7/32 bit operating system |
|
Display |
19.5 inch LCD display(16:9） |
|
|
Input device |
Keyboard and mouse |
|
|
PGMES |
Standard MES interface (order number, NG/OK number, running status) |
|
|
One-key setting |
Built-in standard template data（One key setting parameters） |
|
|
Auxiliary function |
Report abnormal causes and provide solutions when alerting |
|
|
Device monitoring |
Monitor and respond to device status (warning and adjusting parameters when the reject rate is high). |
|
|
Status monitoring |
CPS platform |
|
|
Maintenance |
Remote service, Debugging; Maintenance reminders, Replacement reminders |
|
|
Equipment parameters
|
Reject rate |
0.3% |
|
Pass-Yield |
99.97% |
|
|
MTBF |
210H |
|
|
Voltage |
Single Phase 220～240V, 50-60 Hz |
|
|
Power |
1.5KW（including CP） |
|
|
Air source |
0.5-0.7 MPa, 180--200 l/min |
|
|
Size (W*D*H) |
1450(L) * 720(W) * 1325(H)mm (without the height of the mat 100mm/ alarm light 400mm) |
|
